top of page

Load data for .221 Rem. Fireball + .224 | 40gr | Rhino Penetrator

Recommended Powder(s): Vihtavuori N110

.221 Rem. Fireball + .224 | 40gr | Rhino Penetrator

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 40gr | Rhino Penetrator
Bullet Weight:
40gr | 2.6g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.632" | 16.1mm
Caliber:
.221 Rem. Fireball load data
Case Length (l3):
1.397" | 35.5mm
Cartridge Length (C.O.L.):
1.803" | 45.8mm
Seated Depth:
0.226" | 5.8mm
Shank Seated Depth:
0.226" | 5.8mm
Case Capacity:
22.0 Grains of Water | 1.43 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B5289_C125
Last updated:
2025-01-01

Load data for 28 loads in caliber .221 Rem. Fireball with .224 | 40gr | Rhino Penetrator bullet and 14 powders such as Vihtavuori N110. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
86%
40625
88%
**12
98%
[ADI AR 2207]*
<<locked>>
95%
31270
67%
**66
93%
[Accurate 5744]*
<<locked>>
84%
40161
87%
**94
92%
Accurate No. 11 FS
<<locked>>
85%
40509
87%
**91
96%
Hodgdon TrailBoss
<<locked>>
96%
24758
53%
**95
100%
[IMR 4227]*
<<locked>>
94%
39581
85%
**68
94%
[Lovex D060]*
<<locked>>
86%
40161
87%
**94
92%
Lovex S053
<<locked>>
96%
40437
87%
**20
98%
ReloadSwiss RS 14
<<locked>>
96%
24265
52%
**44
100%
ReloadSwiss RS 36
<<locked>>
97%
41611
90%
**63
95%
SNPE Vectan BA6 1/2
<<locked>>
95%
36027
78%
**27
100%
[Shooters World Buffalo Rifle]*
<<locked>>
86%
40161
87%
**94
92%
Vihtavuori N110 👍
<<locked>>
91%
41191
89%
**27
100%
[Vihtavuori N120]*
<<locked>>
96%
29646
64%
**77
93%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
34360
74%
**67
96%
[ADI AR 2207]*
<<locked>>
92%
27818
60%
**58
91%
[Accurate 5744]*
<<locked>>
81%
36085
78%
**89
90%
Accurate No. 11 FS
<<locked>>
81%
36434
79%
**95
95%
Hodgdon TrailBoss
<<locked>>
81%
19334
42%
**34
100%
[IMR 4227]*
<<locked>>
86%
31633
68%
**58
91%
[Lovex D060]*
<<locked>>
83%
36085
78%
**89
90%
[Lovex S053]*
<<locked>>
81%
25904
56%
**26
93%
ReloadSwiss RS 14
<<locked>>
81%
19072
41%
**83
100%
[ReloadSwiss RS 36]*
<<locked>>
88%
31850
69%
**13
91%
SNPE Vectan BA6 1/2
<<locked>>
81%
24337
52%
**15
99%
[Shooters World Buffalo Rifle]*
<<locked>>
83%
36085
78%
**89
90%
Vihtavuori N110
<<locked>>
81%
30327
65%
**71
99%
[Vihtavuori N120]*
<<locked>>
90%
25266
54%
**33
91%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page